NEW 3 in 1 YOUHTY FLASHER
PLEASE READ THE INSTRUCTIONS BEFORE USE
Thank you for purchasing the 3 in 1 Youthy Flasher. The device was designed to be from the comfort of your own home. Before using the device, please read the user instructions and safety precautions carefully.
Marked attention, for your safe and proper use of the device. Avoid doing any damage or harm to you and your surrounding people.
Select energy level
The device has 5 energy levels, from 1 (the lowest) to 5 (the highest),
designed 5 triangles arranged like a fan on the status display . Increase or decrease energy level by touching Energy Level Adjustment Button repeatedly . It is advisable to perform a patch test to examine the appropriate energy level for you (See chapter in PATCH TEST).
Please place Flash Window vertically
and firmly on your skin where you want to
remove unwanted hair.
When the status display
is flashing, it means the device is ready for
the flash. Press Flash Button to send pulses.
You can choose two different treatment modes
according to your need.
TREATMENT MODES
Flash Mode
Using the single Flash Mode, when you press the Flash Button, a flash is emitted every time. Factory setting is single Flash Mode. This mode is for precision areas like underarms, bikini and face.
Slide Mode
Press and hold the Flash Button down for 3 seconds, the Slide Mode will be activated. Then you can release it. The device will emit flash repeatedly whenever you place the Flash Window firmly on your skin . Slide Mode is for easy, fast treatments on straightforward areas such as legs and stomach.
To turn off Slide Mode, just press the Flash Button once and the device will switch to single Flash Mode.
It is important to do one kind of treatment on the same treatment area within one day. If you are doing hair removal treatment (HR), but also want to do acne clearance treatment (AC) or skin rejuvenation treatment (SR) on the same treatment area, please spend at least 2 days between other treatments.
ACNE CLEARANCE TREATMENT
The acne treatment works by IPL light that it is a specific wavelength to kill bacteria that causes acne (Propionibacterium acnes). Please wear safety glasses and do not treat areas near the eyes. For your safety, please abide by Chapter on Contraindications, Safety Precautions and Warnings before use the device.
AFTER TREATMENT
After treatment, it is advisable to use sunscreen whenever
treated areas may be exposed to the sun and/or tanning lights, such as
tanning booths or solariums.
400.5Any activity or skin product may irritate your skin for 24 hours after
treatment should be avoided, including using hot tubs or saunas,
wearing tight-fitting clothing, using bleaching and creams, perfumed
products or peeling products. The above may cause irritate treated
areas, such as itching and redness.
The device has protective system. The device will stop working under following cases, and show protection lock icon on LCD Status Display (3).
If the device is with no lamp cartridge when you turn on the device, the protection lock icon (as shown) will show on the display. The device will stop working.
If the device’s working temperature is too high during long-time treatment, the protection lock icon (as shown) will show on the display. The device will stop working. You can continue to use after a few minut
